本文已被：浏览 1642次 下载 2616次
Received:September 30, 2010 Revised:October 31, 2010
Received:September 30, 2010 Revised:October 31, 2010
中文摘要: Pro/Engineer 是基于ACIS 几何模型内核的三维造型软件，其自带Pro/TOOLKIT 开发接口，并支持自顶向下设计方法。结合功能表面、广义定位及生长型设计理论，采用动态连接模式开发出支持创新设计的反求系统，详细介绍反求系统的求解过程。
中文关键词: Pro/TOOLKIT 生长型设计 分解重构 反求工程
Abstract:Pro/Engineer is a 3D modeling software based on geometric model of the kernel of ACIS. That own
Pro/TOOLKIT development interface and under the support of Top-Down design method. Binding functional surface,
under the generalized positioning principle and growth design theory, a reverse engineering system that support
innovative design was developed based on dynamic link library. In this paper, the solution process of reverse system was
introduced.
文章编号： 中图分类号： 文献标志码：
基金项目:荷泽学院科研基金项目(XY10JS01)
| Author Name | Affiliation |
| HUANG Fu-Xian | Department of Computer and Information Engineering, Heze University, Heze 274000, China |
| Author Name | Affiliation |
| HUANG Fu-Xian | Department of Computer and Information Engineering, Heze University, Heze 274000, China |
引用文本：
黄复贤.基于Pro/TOOLKIT 的生长型设计中产品反求系统.计算机系统应用,2011,20(6):44-48
HUANG Fu-Xian.Product Recovery About Growth Design System Based on Pro/TOOLKIT.COMPUTER SYSTEMS APPLICATIONS,2011,20(6):44-48
黄复贤.基于Pro/TOOLKIT 的生长型设计中产品反求系统.计算机系统应用,2011,20(6):44-48
HUANG Fu-Xian.Product Recovery About Growth Design System Based on Pro/TOOLKIT.COMPUTER SYSTEMS APPLICATIONS,2011,20(6):44-48
