###
DOI:
计算机系统应用英文版:2011,20(1):48-51
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
多相位感应控制配时方案的优化设计
(中国科学技术大学 自动化系,合肥 230027)
Optimization Design of Multi-Phase Inductive Control Plan
(Department of Automation, University of Science and Technology of China, Hefei 230027, China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1697次   下载 4157
Received:May 11, 2010    Revised:May 31, 2010
中文摘要: 感应控制是城市交通信号控制的重要形式之一,适合于交通流量随机波动较大交叉口的信号控制。针对经典的感应控制存在的效率不高等局限性,深入研究了感应控制的主要控制参数,并给出了其配时计算方法,进一步分析了相序对感应控制的影响,提出了一种动态相序的多相位感应控制算法。所提算法在在线仿真平台进行了实验,较经典的感应控制方法降低了交叉口的平均延误,算法简单易行,实用性较强。
中文关键词: 感应控制  信号配时  变相序  仿真
Abstract:Inductive control is one of important methods of urban traffic signal control. It is suitable for the control of traffic flow with larger fluctuation. In order to overcome the drawbacks of classical inductive control, the formulas of the primary parameters in inductive control are given, impact of phase sequence on inductive control is analyzed, and then a multi-phase inductive control algorithm with dynamic phase sequence is proposed in this paper. The simulations show that the proposed algorithm has lower average delay than classical inductive control. It is easy to implemented and practical.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
邵锦锦,陈锋,孙欣欣,朱特浩,关胜晓.多相位感应控制配时方案的优化设计.计算机系统应用,2011,20(1):48-51
SHAO Jin-Jin,CHEN Feng,SUN Xin-Xin,ZHU Te-Hao,GUAN Sheng-Xiao.Optimization Design of Multi-Phase Inductive Control Plan.COMPUTER SYSTEMS APPLICATIONS,2011,20(1):48-51