###
DOI:
计算机系统应用英文版:2012,21(5):21-25
本文二维码信息
码上扫一扫!
基于 PLC 的风电混合动力系统
(1.辽宁工程技术大学 电气与控制工程学院, 葫芦岛 125105;2.吉林工业职业技术学院, 吉林 132013;3.辽河油田物资公司, 盘锦 124010)
Hybrid Power System about Wind and Electricity Based on PLC
(1.Department of Electrical and Control Engineering, Liaoning Technical University, Huludao 125000, China;2.Jilin Vocational College of Industry and Technology, Jilin 132013, China;3.Liaohe Oilfield Materials Corporation, Panjin 125105, China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1633次   下载 3393
Received:September 06, 2011    Revised:October 14, 2011
中文摘要: 针对以往工业生产中对风力资源利用的不足,设计了基于PLC 控制的风电混合动力系统,开辟了风能发展的新空间。系统以风力机为主、电动机为辅带动空压机,并将空压机产生的压缩气体存储在储气罐内,再由储气罐内的气体驱动作为执行机构的气缸按要求稳定的工作,以达到节约能源的目的。系统以PLC 为控制核心,机械部分为基础,气动系统对外输出能量,通过系统测试得到典型结果。具有安全性好,运行成本低,维护容易,无噪音污染等明显优点,可以广泛普及推广,适应节能减排的需求,大有市场前景。
中文关键词: PLC  压力  控制  传感器
Abstract:In order to solve the problem about the utilization of wind resources in industrial production in the past was insufficiently, we designed the wind hybrid systems based on PLC, and it opened up a new space of the development of the wind power. Based on wind turbine, the system drive the air compressor with the supplement of electric motors, storing the compressed air to air storage tank, which has an inner drive served as the cylinder of the executing agency and operating steadily as demanding, to realize the energy savings finally. PLC is the core, machinery is base, pneumatic system output energy in this system, and typical test results obtained through the system test. There are lots of advantages in this system, such as good safety, lower cost, easy to maintain, no noise and pollution. It can be popularized widely, and it also adapt to the demand of energy conservation and emission reduction, what’s more, it has a good market prospect.
keywords: PLC  pressure  control  sensor
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
李文江,黄冠,刘南,安柏峰.基于 PLC 的风电混合动力系统.计算机系统应用,2012,21(5):21-25
LI Wen-Jiang,HUANG Guan,LIU Nan,AN Bai-Feng.Hybrid Power System about Wind and Electricity Based on PLC.COMPUTER SYSTEMS APPLICATIONS,2012,21(5):21-25