本文已被：浏览 2594次 下载 4152次
Received:February 19, 2011 Revised:March 20, 2011
Received:February 19, 2011 Revised:March 20, 2011
中文摘要: 针对采用视频D/A 处理器将LCD 转VGA 时出现的带宽不够,VGA 显示器屏闪的问题,给出了一种采用FPGA 结合视频D/A 的显示控制器实现方法。该方法将处理器送出来的LCD 视频数据放在SRAM 中缓存,再按VGA 的规格要求将数据读出并送至D/A 转换成VGA 格式的视频输出,整个处理流程由FPGA 来控制,有效地解决了显示输出占用大的数据传输带宽问题。该系统已成功地在某机车图形显示系统中使用。
Abstract:Aiming to solve the problem that the bandwidth is not enough and the VGA monitor is unstable when using video D/A to convert LCD to VGA, the paper presents an implement method of controller that uses FPGA to cooperate with video D/A processor. This method stores the LCD video data that comes from MCU into SRAM for buffering, then read it regularly as the VGA rules need and send to D/A, which converts LCD to VGA, the whole process is controlled by FPGA, and it effectively solves the problem that video output occupies too much bandwidth. this system has already been used in some monitor and display system on the train.
文章编号： 中图分类号： 文献标志码：
基金项目:
引用文本：
刘建平,曾文海,黎福海,肖祥慧.采用FPGA 的LCD 转VGA 控制器的设计.计算机系统应用,2011,20(10):71-73
LIU Jian-Ping,ZENG Wen-Hai,LI Fu-Hai,XIAO Xiang-Hui.Design of LCD to VGA Controller Using FPGA.COMPUTER SYSTEMS APPLICATIONS,2011,20(10):71-73
刘建平,曾文海,黎福海,肖祥慧.采用FPGA 的LCD 转VGA 控制器的设计.计算机系统应用,2011,20(10):71-73
LIU Jian-Ping,ZENG Wen-Hai,LI Fu-Hai,XIAO Xiang-Hui.Design of LCD to VGA Controller Using FPGA.COMPUTER SYSTEMS APPLICATIONS,2011,20(10):71-73
