本文已被：浏览 1894次 下载 97次
Received:June 05, 2010 Revised:July 02, 2010
Received:June 05, 2010 Revised:July 02, 2010
中文摘要: 针对工业智能控制系统的发展要求，提出了一种基于PROFIBUS 协议的工业电气火灾监控系统的设计方案。采用模块化思想将整个系统分为监控器和协议转换模块，给出了主要的硬件电路图及软件流程，并用组态软件WINCC 和STEP7 设计了上位机人机界面。实际运行结果验证了设计的可行性，表明该系统的可靠性高，实时性强，扩展性能好。
中文关键词: 电气火灾 PROFIBUS 协议 SPC3 监控系统
Abstract:The design of an electrical fire monitor system in industry base on the PROFIBUS protocol was proposed, according to the demands of intelligent control system in industry. Modularization was adopted in this design and the whole system was divided into two module, monitor and protocol conversion respectively. The main circuit diagram of hardware and software was given and the human-machine interface of monitor system was designed by using configuration software of WINCC and STEP7 in this paper. The practical run result has proved the design was feasible, the system was reliable and timely and it had good extensibility.
keywords: electrical fire PROFIBUS protocol SPC3 monitor system
文章编号： 中图分类号： 文献标志码：
基金项目:浙江省重大科技专项(2007C11072)
引用文本：
文露,戴瑜兴,王卫国,王兴刚.基于PROFIBUS 协议的工业电气火灾监控系统.计算机系统应用,2011,20(2):109-112
WEN Lu,DAI Yu-Xing,WANG Wei-Guo,WANG Xing-Gang.Electrical Fire Monitor System in Industry Based on PROFIBUS Protocol.COMPUTER SYSTEMS APPLICATIONS,2011,20(2):109-112
文露,戴瑜兴,王卫国,王兴刚.基于PROFIBUS 协议的工业电气火灾监控系统.计算机系统应用,2011,20(2):109-112
WEN Lu,DAI Yu-Xing,WANG Wei-Guo,WANG Xing-Gang.Electrical Fire Monitor System in Industry Based on PROFIBUS Protocol.COMPUTER SYSTEMS APPLICATIONS,2011,20(2):109-112
