基于 PLC 的风电混合动力系统
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Hybrid Power System about Wind and Electricity Based on PLC
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对以往工业生产中对风力资源利用的不足,设计了基于PLC 控制的风电混合动力系统,开辟了风能发展的新空间。系统以风力机为主、电动机为辅带动空压机,并将空压机产生的压缩气体存储在储气罐内,再由储气罐内的气体驱动作为执行机构的气缸按要求稳定的工作,以达到节约能源的目的。系统以PLC 为控制核心,机械部分为基础,气动系统对外输出能量,通过系统测试得到典型结果。具有安全性好,运行成本低,维护容易,无噪音污染等明显优点,可以广泛普及推广,适应节能减排的需求,大有市场前景。

    Abstract:

    In order to solve the problem about the utilization of wind resources in industrial production in the past was insufficiently, we designed the wind hybrid systems based on PLC, and it opened up a new space of the development of the wind power. Based on wind turbine, the system drive the air compressor with the supplement of electric motors, storing the compressed air to air storage tank, which has an inner drive served as the cylinder of the executing agency and operating steadily as demanding, to realize the energy savings finally. PLC is the core, machinery is base, pneumatic system output energy in this system, and typical test results obtained through the system test. There are lots of advantages in this system, such as good safety, lower cost, easy to maintain, no noise and pollution. It can be popularized widely, and it also adapt to the demand of energy conservation and emission reduction, what’s more, it has a good market prospect.

    参考文献
    相似文献
    引证文献
引用本文

李文江,黄冠,刘南,安柏峰.基于 PLC 的风电混合动力系统.计算机系统应用,2012,21(5):21-25

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-09-06
  • 最后修改日期:2011-10-14
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号