###
计算机系统应用:2020,29(6):132-136
本文二维码信息
码上扫一扫!
电池管理系统的报文采集与解析
(1.上海工程技术大学 机械与汽车工程学院, 上海 201620;2.上海玫克生储能科技有限公司, 上海 201619)
Message Collection and Analysis of Battery Management System
(1.School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China;2.Shanghai Makesens Energy Storage Co. Ltd., Shanghai 201619, China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 243次   下载 177
投稿时间:2019-09-11    修订日期:2019-10-10
中文摘要: 电池管理系统(BMS)主要功能是实时监控、管理动力电池组中各单体电池的正常工作, 电池的各项信息被BMS以CAN报文的形式发出. 通过采集和解析BMS的报文, 能够对电池的性能作进一步分析评测. 本文以树莓派为载体, 通过设计树莓派的扩展板实现CAN报文的采集, 同时在树莓派中解析CAN协议的DBC文件格式. 设计了一款可移动便携式的CAN报文采集与解析设备, 并根据电池组所有电芯开路电压的解析数据对电池一致性做出快速评估.
中文关键词: CAN通信  DBC文件  树莓派  采集  解析
Abstract:The main functions of a Battery Management System (BMS) are to monitor and to manage the normal work of each single battery cell in the power battery pack. The information of the battery are sent out by BMS in the form of the CAN message. By collecting and analyzing the BMS messages, the performance of the battery can be further analyzed and evaluated. This study used Raspberry PI as the carrier, realizing the CAN message collection by designing an extension board of the Raspberry PI, and the messages were interpreted as CAN protocol DBC file format in Raspberry PI. According to the open circuit voltage of all cells in the battery pack, the battery consistency was quickly evaluated.
文章编号:7361     中图分类号:    文献标志码:
基金项目:
引用文本:
任大恒,严晓,黄碧雄,王影.电池管理系统的报文采集与解析.计算机系统应用,2020,29(6):132-136
REN Da-Heng,YAN Xiao,HUANG Bi-Xiong,WANG Ying.Message Collection and Analysis of Battery Management System.COMPUTER SYSTEMS APPLICATIONS,2020,29(6):132-136

用微信扫一扫

用微信扫一扫