###
计算机系统应用:2019,28(1):233-238
本文二维码信息
码上扫一扫!
网络安全专用产品网闸性能测试方法
(公安部第三研究所 检测中心, 上海 200031)
Performance Test Method for Gap in Network Security Special Products
(Testing Center, the Third Research Institute, Ministry of Public Security, Shanghai 200031, China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 192次   下载 94
投稿时间:2018-05-16    修订日期:2018-06-08
中文摘要: 为解决网络安全专用产品网闸的性能测试问题,研究了针对网闸产品性能的测试方法,设计了包括使用iPerf软件和IXIA硬件的两种测试方式,两种测试方式均能够适用于对网闸性能的测试.同时,还分析了国家标准中对网闸性能要求的测试方法,并与网络安全专用产品的性能要求做了对比说明,最后通过实验的方式,测试了网络安全专用产品中网闸的吞吐量和系统延时性能指标,给出了14款网闸产品的性能结果分布.
Abstract:To solve the problem of performance testing for gap of network security special products, a test method for gap performance was studied. Two test methods including the use of iPerf software and IXIA hardware were designed. Both test methods can be applied to the test of gap performance. At the same time, a test method for the performance requirements of gap in the national standards was also analyzed, and a comparative analysis was made with the performance requirements of network security special products. Finally, the throughput and system delay performance for the gap of network security special products are tested through experiments. The distribution results of the 14 gap products are given.
文章编号:     中图分类号:    文献标志码:
基金项目:国家重点研发计划(2016YFB0800903)
引用文本:
李旋,顾建新,李毅.网络安全专用产品网闸性能测试方法.计算机系统应用,2019,28(1):233-238
LI Xuan,GU Jian-Xin,LI Yi.Performance Test Method for Gap in Network Security Special Products.COMPUTER SYSTEMS APPLICATIONS,2019,28(1):233-238

用微信扫一扫

用微信扫一扫