面向3DCAAPP系统的管路信息提取与应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

电子信息产业发展基金(工信部财[2012] 407号);武汉市“黄鹤白云”计划第二批示范项目(武新管[2013] 82号)


Extraction and Application of Piping Information Oriented to Three-Dimensional Computer-Aided Assembly Process Planning System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    基于三维模型的计算机辅助装配工艺规划(3DCAAPP)系统正日益受到企业信息化的青睐,针对应用于航空航天、船舶等领域的管路系统,介绍利用三维CAD软件的二次开发技术提取其在3DCAAPP中特征建模所需要的装配信息并加以应用.

    Abstract:

    Computer-Aided Assembly Process Planning Based on Three-Dimensional Model (3DCAAPP) System is increasingly being favored by enterprise information. This paper focuses on extracting assembly information oriented to the Piping system which is commonly used in aerospace and shipping and other industries by secondary development technology of each three-dimensional CAD software and using it to feature modeling in 3DCAAPP.

    参考文献
    相似文献
    引证文献
引用本文

张金,杨波.面向3DCAAPP系统的管路信息提取与应用.计算机系统应用,2014,23(4):131-134

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-08-30
  • 最后修改日期:2013-09-27
  • 录用日期:
  • 在线发布日期: 2014-04-25
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号