基于CUnit自动化测试框架的设计与实现
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省科技重大专项资助项目(2010HZ0002-1);福建省经贸委2006省装备制造业消化吸收再创新项目(闽经贸计[2006]804号)


Design and Implementation of Automation Testing Framework Based on CUnit
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    以Xunit为代表的软件自动测试框架已经趋于成熟, 针对嵌入式系统应用特点, 提出了一种基于CUnit的自动化测试框架, 并介绍了相关实现技术, 对CUnit单元测试框架进行二次开发, 使之适合在凌阳单片机SPT6608A上使用, 在实践中证明此框架行之有效, 能全面实现对SPT6608A软件模块的自动化测试.

    Abstract:

    To XUnit, as a representative of the software to be automatic test framework has tended to mature. Based on embedded system application characteristics, this paper proposed a test automation framework based on the CUnit, and introduced the relevant implementation technology. The CUnit unit test framework was secondary developed, was made suitable for use in SPT6608A sunplus single chip microcomputer. In practice, the framework is proved effective, it can achieve to SPT6608A software modules of test automation.

    参考文献
    相似文献
    引证文献
引用本文

陈炳煌,邵明,林秋果.基于CUnit自动化测试框架的设计与实现.计算机系统应用,2013,22(2):194-197

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-07-10
  • 最后修改日期:2012-09-22
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号