基于光纤陀螺仪的信号补偿
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Signal Compensation Based on Fiber Optic Gyroscope
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    光纤陀螺仪是目前广泛使用的一种惯性仪器, 但在使用过程中仍然会遇到有很多问题. 光纤陀螺仪在使用过程中由于光纤陀螺仪内部元器件构造、材料的使用、以及元器件的精度等因素, 会产生一些误差, 如启动温度、零漂、刻度因子等. 同时在使用的过程中受外界的环境干扰也会使光纤陀螺仪产生误差, 如受外界的振动, 环境温度变化等. 通过分析研究光纤陀螺仪的原理和输出信号, 建立误差补偿模型, 对误差进行补偿分析. 应用分段平均选点法补偿了由于温度变化在信号中产生的线性趋势项, 以及使用平滑滤波算法对光纤陀螺仪输出信号进行

    Abstract:

    The fiber optic gyroscope is an inertial instrument, which is used widely, but there are still many problems in the application of the FOG. The disadvantages of the fiber optic gyroscopes such as such as temperature effect, non-linearity of scale factory and disturbance. This paper analyses the principle and the signal output of the fiber-optic gyroscope. It establishes the compensate model of nonlinearity error and linearity error, uses signal processing algorithm and signal filtering algorithm to compensate variety of error. The signal processing algorithm is proved to be effective through actual experiments.

    参考文献
    相似文献
    引证文献
引用本文

俞成森,祝华军,叶林.基于光纤陀螺仪的信号补偿.计算机系统应用,2013,22(2):165-168

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-07-04
  • 最后修改日期:2012-08-24
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号